Xianyang North West Medical Instrument (Group) Co., Ltd.
Main products:Dental unit,Handpiece,Casselet sterilization,Sealing Machine,Compressor
Products
Contact Us
  • Contact Person : Ms. Sun Kathy
  • Company Name : Xianyang North West Medical Instrument (Group) Co., Ltd.
  • Tel : 86-29-33289007
  • Fax : 86-29-33289007
  • Address : Shaanxi,Xianyang,No. 3, Biyuan Road
  • Country/Region : China
  • Zip : 710021

Medical Instruments

Medical Instruments
Product Detailed
Brief Product introduction 1.1 Structure Introduction 1.1.1 The advanced configuration with high speed and low speed handpiece

Technical Specification:

1. Power supply: AC 220V±10%  50Hz

2. Power: 500VAwith dental chair

3. The leak current to the ground: ≤0.5mA

4. Resistance insulation: ≥2MΩ

5. Air supply: air pressure 0.55MPa(at connection box)

0.6MPa0.8MPa (compressed air),free from oil, water

6. Water supply: water pressure 0.2MPa0.4MPa

Recommend water hardness≤60mg/l

7. Fiber optic turbine handpiece

The handpiece will begin to work as soon as the handpiece is pulled and foot control is stepped

Slide foot control on left side (or right side), there are shown working function and working power on the LED

ASlide the foot control pedal on the left side, the handpiece is working with water. Adjusting the water volume valve could change the spray.

BSlide the foot control pedal on the light side, the handpiece is working without water. (Press the button - also could adjust the power)

CClean air switch of foot control pedal is stepped.the handpiece can spray clean air.

Adjust the illumination of fiber optic handpiece:pick up turbine handpiece, and press the fiber optic light button on the main control panel. Adjust the illumination by +and -.

Adjust water volume of fiber optic handpiece using the switch on the instrument tray to adjust water volume and spray.

8. High speed handpiece

Rotation≥300000r/min(4 holes)

Operation pressure: 0.25Mpa(according to the model)

9. Low speed handpiece

Pick up the low speed handpiece, adjust the speed and direction bySEL1andSEL2

a. Speed

When set the speed, adjust the rotation by+and -, and press SEL2 to confirm, then press SEL1 to return. (Automated return without operation in 3 seconds) (Fig.25)

10. Six way syringe

Take down the six way syringe from the instrument tray and push the corresponding button, then the water, air and spray can be obtained.

 Warm water and warm spray are available by pressing the key twice.

11. Operating light

   AC 17V  95W

12. Rinsing water heating button:

AC 24V    80W

Temperature scope: 20°-55°

13. Water pipe sterilization

Open the right door, pick up the sterilization bottom. Add 400ml disinfector (3% medical H2O2), and reset the bottom into the main chest, then close the door.

In the sterilization process, install the sterilization holder on the spittoon; keep pressing the sterilization button more than 4 seconds. The unit comes to the automated sterilization system. Insert the connecting pipe of handpiece into sterilization holder. The sterilization time will be 30 minutes. There is sign in LED , and close the sterilization bottom for stop the process immediately.

14. Suction ejector: air negative pressure

15. Saliva ejector: water negative pressure

Medical Instruments



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.